RB26 Tuning Packages

These are drive in, drive out packages for any R32-34 GTR

Link G4X
HKS EVC VII
Custom 3D printed mount
PLX wideband oxygen sensor
Cleaned and balanced injectors
Fuel pump rewire
Labor
Custom tune on our in house 4wd Mustang dyno

Rebuild existing engine for HKS 2.8 Stroker
King main and rod bearings
Painted block with NEW OEM hardware kit
Machine work
Balanced rotating assembly
Line hone
Surface deck the block
Resized stock rods
Bore and hone with torque plate
Machine work for head
Stage 1 headwork (gasket match, light port and polish)
Clearance of head for larger lift of Step 2 exhaust cam
Valve grind
New OEM seals
Inspection of guides and replace as needed
Set valve clearance
HKS 2.8 Stroker
Link G4X
HKS EVC VII
Custom 3D printed mount
HKS Step 2 V-Cam
HKS Step 2 exhaust cam
HKS valve springs
ATS carbon twin disk clutch
New OEM N1 oil pump with Boundary gears
HKS GTIII 25/30 for good response and about 500+tq and 500+hp
PLX wideband oxygen sensor
Fuel pump rewire
Bosch EV14 1000cc injector kit
Powder coating
Your choice of color
Remaned intake manifold with replated hardware and replated fuel rail
New OEM oil pressure sender
New OEM air regulator
New OEM water hose kit
New OEM timing belt kit
NEW OEM hardware kit
CarboTech brake pads
Fresh zinc plated bolts thru-out
Labor
Custom tune on our in house 4wd Mustang dyno