HKS Complete Engine RB26 2.8L Step2 V2 V-Cam
Version 2 has improved intake / exhaust balance by adopting a big valve for exhaust, optimized the port shape, and cut the valve seat into an R shape to prevent the boundary layer from peeling off. Released.
- Proven 2.8L STEP2 kit assembled by skilled workers on N1 block
- Improves intake and exhaust efficiency by optimizing the exhaust side big valve and port shape, and measures against heat with sodium-filled type
- Combustion chamber shape optimized by NC processing to suppress knocking
- Super cooling head gasket and head air vent hole processing to improve head cooling
- Adopts a proven large-capacity reinforced oil pump to ensure stable oil pressure in the entire rotation range
- The main bearing and connecting rod bearing are subjected to numerous tests to select the optimum one.
- Measures against pulling out with grommet head gasket and reinforced head bolt
- Assemble a high opening camshaft to ensure high rotation elongation
- Uses reinforced valve springs and titanium retainers to prevent surging at high revs
- A reinforced valve stem seal is used to ensure valve sealing at high speeds and high temperatures.
- Uses a separator that shuts out the oil that flows out from the cam cover together with blow-by gas.
* It is recommended to use HKS Racing Pro 10 W50 as the engine oil.
-
2.8L STEP2 KIT, forged piston, forged machined H section connecting rod, forged crankshaft
-
High-strength large-capacity oil pump
-
IN: V cam system STEP PRO
EX: STEP2 272 ° -
Slide cam pulley
-
Titanium valve spring retainer
-
Change to the optimum shape to suppress NC processing and knocking of the
combustion chamber * The shape that makes the best use of squish by making the volume of the combustion chamber as small as possible -
Separator that stops oil outflow with multiple partitions
-
R-shaped sheet for improved efficiency
Port polished to a shape that connects smoothly to it
Specifications
| HKS 2.8L V-CAM KIT | genuine | |
|---|---|---|
| Boa | 87.0mm | 86.0mm |
| stroke | 77.7mm | 73.7mm |
| Compression ratio (t = 1.2) | 8.6 | --- |
| Allowable rotation speed | 8,800 rpm | 7,600 rpm |
| Displacement | 2,771cc | 2,568cc |
CCOMPLETE ENGINE RB26 2.8L STEP2 V-CAM Version2
| Camshaft | HKS V-CAM STEP Pro IN: 264 ° / LIFT 10mm |
| HKS STEP2 EX: 272 ° / LIFT 10mm | |
| Blow-by separator | IN: HKS reinforced product |
| EX: HKS reinforced product | |
| Cam pulley | HKS SLIDE CAM-PULLEY (EX) |
| Timing belt | HKS Fine Tune Timing Belt |
| Spring retainer | HKS titanium product |
| valve | IN: Genuine valve |
| EX: 1mm big valve (with sodium) | |
| Valve spring | HKS reinforced product |
| Stem seal | HKS reinforced product |
| Head processing contents | Machining of combustion chamber (leaving squish) |
| Full surface polishing of port, sheet R processing | |
| Cam escape processing | |
| Water jacket air vent hole processing | |
| Head gasket | HKS GROMMET S-COOLING (t = 1.2) |
| Head bolt | HKS reinforced bolt |
|
Block (24U) processing content |
Surface research (correction of parallelism with the main journal) |
| Water hole processing | |
| Chamfering of deck surface holes (countermeasures against cracks) | |
| Edge removal processing at the bottom of the cylinder | |
| Bowling | |
| Oil pump | HKS reinforced product |
| piston | HKS forged products |
| Connecting rod | HKS H cross section |
| Crankshaft | HKS forged product |
| Main bearing | ACL |
| Connecting rod bearing | ACL |
| Covers | Changed to a dark metal color that can express a more glossy luster |
